G-Tek® X-Treme™

X-Treme™ 15G seamless knitted glove XREY™ fiber blended liner with foam nitrile coating on palm and fingers - with dots, cut D.

16-755

4X42D

EN 388 2016 Results: 4X42D
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X1XXXX

Protective Gloves Against Thermal Hazards: X1XXXX
Resistance to Flammability - X
Contact Heat Resistance - 1
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Available Colors:

  • SIZES: 6-11
  • Country of Origin:
Product Attributes

Coating: Nitrile

Nitrile: Nitrile is a synthetic rubber compound that offers excellent puncture, tear and abrasion resistance. Nitrile is also known for its resistance to hydrocarbon-based oils or solvents. Nitrile coated gloves are the first choice for industrial jobs which require handling of oily parts. Nitrile is durable and helps to maximize protection.

View All Nitrile

Grip: Dot

Dot: Patterns such as dots, blocks and palm coatings in a variety of polymers provide an enhanced grip, performance and durability. String knit/ambidextrous gloves can have a pattern screened on both sides to extend the life of the glove.

View All Dot

Gauge: 15

Gauge: The number of rows of stitches per inch. A higher gauge means less bulk and greater dexterity.

View All 15 Gauge
Product Description

Features

  • • No fiberglass or steel, which eliminates irritation and reduces CO2 emissions.
  • • Durable micro-foam palm and finger coating that excels in dry, wet or oily conditions.
  • • Exceptional dexterity
  • • Gauge : 15
  • • XREY™ fiber has been specially developed to provide a product that is lighter, more comfortable and cut resistant product by removing the need for steel or fiberglass while delivering ultra-high levels of performance levels
  • • Dermatest® guarantee label, which guarantees, via a third-party that the glove is ‘compatible with the skin', that it does not cause irritation or discomfort to the skin.

Related Product Downloads

  • XREY™ fiber liner
  • 15 Gauge
  • Size: 6-11
  • Cut D
  • touchscreen
  • reinforced thumbcrotch
  • 6 pairs/72 pairs per case
Standards Met

EN 388 2016 Results: 4X42D

Abrasion: 4 Cut (Coupe Test): X Tear: 4 Puncture: 2 Cut (TDM-100 Test): D Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Protective Gloves Against Thermal Hazards: X1XXXX

Resistance to Flammability - X
Contact Heat Resistance - 1
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose applications for various industrial, construction, and MRO applications. As a comprehensive line of hand protection, G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut resistant glove is tested to both ANSI and EN standards, and test scores are readily available on each product’s webpage.

View Products
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL