Beat the Cold

Many of our glove lines offer an insulated version for winter use. These are gloves that they are made for protection in cold working environments such as freezer warehouses, commercial fishing and many other applications up to and including our Temp-Gard line of extreme temperature liquid proof.

SHOWING 1-7 OF 7 ITEMS
1 of 1
Latex Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blend Glove with Acrylic Lining and Double-Dip Latex MicroSurface Grip on Palm, Fingers & Knuckles

16-820

  • Seamless Knit Glove
  • 13G PolyKor Blended Shell
  • 7G Acrylic Terry Liner
  • 3/4 Dip Blue Latex w/ Black Latex MicroSurface Grip
  • Knit Wrist
  • SIZES: 7-11
  • PACKED: 6 Dozen/Case

3X43D

EN 388 2016 Results: 3X43DX

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Protective Gloves Against Cold: X2X

Convective Cold Resistance - X
Contact Cold Resistance - 2
Water Permeability - X

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

Compare

G-Tek®

G-TEK® NEOFOAM® MICRO-SURFACE SEAMLESS KNIT THERMOLITE GLOVE WITH NEOFOAM® COATED PALM & FINGERTIPS - 15 GAUGE

34-684-EN

  • Thermolite / Neofoam® Micro-Surface Coating
  • Seamless knit
  • Shell: Brick / Coating: Black
  • SIZES 6 -11
  • PACKAGING 1 pair per bag, 12 pairs per dozen, 120 pairs per case
  • SIZES: 6-11
  • PACKED: 120 Pair/Case

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Latex MicroFinish Grip BEST SELLER

PowerGrab™ Thermo

Hi-Vis Seamless Knit Acrylic Terry Glove with Latex MicroFinish Grip on Palm & Fingers

41-1400

  • Seamless Knit Glove
  • 10 Gauge Hi-Vis Orange Acrylic Liner
  • Brown Latex MicroFinish Grip
  • Palm Dip w/ Full Coat Thumb
  • Complies w/ FDA 21 CFR
  • SIZES: 7-11
  • PACKED: 6 Dozen/Case

1141

EN 388 2016 Results: 1141X

Abrasion: 1
Cut (Coupe Test): 1
Tear: 4
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X2XXXX

Protective Gloves Against Thermal Hazards: X2XXXX

Resistance to Flammability - X
Contact Heat Resistance - 2
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Protective Gloves Against Cold: 01X

Convective Cold Resistance - 0
Contact Cold Resistance - 1
Water Permeability - X

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

Compare
Nitrile Coated Grip

G-Tek® PolyKor®

Seamless Knit PolyKor® Blend Glove with Acrylic Liner and Double-Dipped Nitrile Foam Grip on Full Hand - Touchscreen Compatible

41-1415

  • Seamless Knit
  • 15G Yellow PolyKor Blend Shell
  • 7G Acrylic Liner
  • Double Dip
  • Full Blue Nitrile w/ 3/4 Dip Black Nitrile Foam Grip
  • Touchscreen
  • SIZES: 8-11
  • PACKED: 6 Dozen/Case

4X32C

EN 388 2016 Results: 4X32CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X2XXXX

Protective Gloves Against Thermal Hazards: X2XXXX

Resistance to Flammability - X
Contact Heat Resistance - 2
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Protective Gloves Against Cold: X2X

Convective Cold Resistance - X
Contact Cold Resistance - 2
Water Permeability - X

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
NEW

G-Tek®

G-TEK® SEAMLESS KNITTED GLOVE IN BRUSHED ACRYLIC, NITRILE FOAM COATED WITH DOT ON PALM AND FINGERS – 13 GAUGE

41-E1335

  • Brushed acrylic support / Nitrile foam coating with PVC dots
  • 13 Gauge
  • Shell: Blue / Coating: Black
  • SIZES 6 -11
  • PACKAGING 1 pair per bag, 12 pairs per dozen, 72 pairs per case
  • SIZES: 6-11
  • PACKED: 72 Pair/Case

3131

EN 388 2016 Results: 3131X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X1XXXX

Protective Gloves Against Thermal Hazards: X1XXXX

Resistance to Flammability - X
Contact Heat Resistance - 1
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Protective Gloves Against Cold: X1X

Convective Cold Resistance - X
Contact Cold Resistance - 1
Water Permeability - X

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

Compare

G-Tek®

GANT G-TEK® HI-VIS SEAMLESS KNIT ACRYLIC TERRY GLOVE WITH LATEX MICRO-POROUS GRIP

41-E1475

  • Acrylic terry liner and Micro-Porous latex
  • Shell: Orange HV / Coating: Black
  • Jauge 10
  • SIZES 9- 11
  • PACKAGING Single polybag, pack of 12, case of 72
  • SIZES: 9-11
  • PACKED: 72 Pair/Case

2242

EN 388 2016 Results: 2242X

Abrasion: 2
Cut (Coupe Test): 2
Tear: 4
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Protective Gloves Against Cold: X1X

Convective Cold Resistance - X
Contact Cold Resistance - 1
Water Permeability - X

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

Compare
NEW

G-Tek®

G-TEK® SEAMLESS KNITTED GLOVE IN YELLOW HV POLYAMIDE, ACRYLIC BOUCLET LINING, AND ¾ BLACK PVC COATING – 15 GAUGE

41-E7321

  • Polyamide backing, acrylic terry lining 3/4 PVC coating
  • Seamless knit
  • Shell: Yellow HV / Coating: Black
  • Food contact
  • SIZES 7 -11
  • PACKAGING 1 pair per bag, 6 pairs per pack, 72 pairs per case
  • SIZES: 7-11
  • PACKED: 72 Pair/Case

3241

EN 388 2016 Results: 3241X

Abrasion: 3
Cut (Coupe Test): 2
Tear: 4
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Protective Gloves Against Cold: X2X

Convective Cold Resistance - X
Contact Cold Resistance - 2
Water Permeability - X

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

Compare
SHOWING 1-7 OF 7 ITEMS
1 of 1
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL