Assurance®

Nitrile Coated Glove with PolyKor® Blended Liner and MicroSurface Grip on Palm & Fingers - 14"

56-586CR

4X42D

EN 388 2016 Results: 4X42DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Protective Gloves Against Micro-organisms

The EN ISO 374-5 standard measures the ability of gloves to protect users against bacteria and fungi. Gloves with this marking must pass EN374-2 for leak testing.

Available Colors:

Gray
  • Packed: 6 Dozen/Case
  • Country of Origin: China
Product Attributes

Polymer: Nitrile

Nitrile: Nitrile provides good resistance to hydrocarbon derivatives. It is tough and resistant to abrasion, snags and perforation. However, nitrile with a smooth finish is not recommendedin oily conditions, and avoid prolonged contact with ketones and aromatic solvents.

View All Nitrile

Grip: MicroSurface

MicroSurface: Created by using a soft and flexible compound such as latex or nitrile filled with thousands of tiny suction cups. As these suction cups come into contact with a surface, they create a vacuum that disperses fluids away from the object to allow clean contact with the object. Works well in handling wet and dirty applications.

View All MicroSurface
Product Description

Product Description

Assurance® cut resistant chemicals gloves were designed and developed for those working with chemicals while also requiring a level of cut protection.

Features

  • Nitrile polymer provides excellent grip in wet, oily and dry conditions
  • PolyKor® blended liner is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistance
  • MicroSurface coatings are infused with thousands of tiny suction cup pockets that create a vacuum effect that dispenses fluids away on contact.
  • MicroSurface coating provides excellent resistance to liquid permeation.
  • Tested to EN 374-5:2016 for protection against micro-organisms
  • Strong protection to punctures and abrasions

Related Product Downloads

  • Supported Nitrile with MicroSurface Grip
  • Gray Polykor cut resistant liner
  • 14" length.
Standards Met

EN 388 2016 Results: 4X42DX

Abrasion: 4 Cut (Coupe Test): X Tear: 4 Puncture: 2 Cut (TDM-100 Test): D Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Protective Gloves Against Micro-organisms Bacteria and Fungi

The EN ISO 374-5 standard measures the ability of gloves to protect users against bacteria and fungi. Gloves with this marking must pass EN374-2 for leak testing.

Chemical Permeation

Chemical Permeation

The chemical permeation of our product is measured in accordance to European Standard EN 374-3. This measures the resistance of protective gloves against chemicals and microorganisms. Part 3 of the standard determines the level of resistance to permeation by chemicals.

Breakthrough Time (BTT)

The number of minutes from initial contact with a test chemical until it is first detected on the inside of the glove.

Breakthrough Time - Protection Index

Each chemical tested is classified in terms of breakthrough time (performance level 0 to 6).

CAUTION: This information is provided as an aid in determining the general suitability of various products for use with specific chemicals. These recommendations are advisory only and the SUITABILITY OF THE PRODUCT FOR A SPECIFIC APPLICATION OR ENVIRONMENT MUST BE DETERMINED BY THE PURCHASER OR USER OF THE PRODUCT. This information should be used as a guide only.

The Assurance brand of products has been developed for chemical resistant applications found in all types of industrial settings and designed with the utmost safety in mind. Chemical resistance test results are available on a wide variety of chemical families found commonly in the workplace. All of these gloves have been tested for durability as well. Assurance hand protection will satisfy your needs or we'll take the product back.

View Products
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL