Leaders in
Hand Protection
and PPE

BROWSE ALL PRODUCTS

Search Results For "CHAUSSURES"

SHOWING 1-36 OF 98 ITEMS
1 of 3
Chemical Resistant

Assurance®

ASSURANCE® GLOVE, CHEMICALS RESISTANT NITRILE, BLACK NITRILE MICRO-SURFACE COATING

56-E622

  • Nitrile/Nylon
  • Seamless knitted cuff
  • Shell: Purple / Coating: Black
  • SIZE 6 -11
  • PACKAGING Single polybag, pack of 12, case of 120
  • SIZES: 7-11
  • PACKED: 120 Pair/Case

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Protective Gloves Against Micro-organisms

The EN ISO 374-5 standard measures the ability of gloves to protect users against bacteria and fungi. Gloves with this marking must pass EN374-2 for leak testing.

Chemical Resistant NEW

Assurance®

Nitrile Coated Glove with PolyKor® Blended Liner and MicroFinish Grip on Palm & Fingers - 14"

56-586CR

  • Supported Nitrile with MicroFinish Grip
  • Gray Polykor cut resistant liner
  • 14" length.
  • PACKED: 6 Dozen/Case

4X42D

EN 388 2016 Results: 4X42DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Protective Gloves Against Micro-organisms

The EN ISO 374-5 standard measures the ability of gloves to protect users against bacteria and fungi. Gloves with this marking must pass EN374-2 for leak testing.

Safety Glasses

Sunburst™

Full Frame Safety Glasses with Black Frame, Polarized Gray Lens and Anti-Scratch / Anti-Fog Coating

250-47-0041

  • Polarized Gray Lens
  • AS/AF
  • Black Frame
  • Rubber Nose Pads and Temple Tips
  • 8 Base Curve Lens
  • SIZES: OS
  • PACKED: 72 Pair/Case
Safety Glasses

Sunburst™

Full Frame Safety Glasses with Black Frame, Red Mirror Plus Lens and Anti-Scratch / Anti-Reflective Coating

250-47-0004

  • Red Mirror Plus Lens
  • AS/Anti-Reflective
  • Black Frame
  • Rubber Nose Pads and Temple Tips
  • 8 Base Curve Lens
  • SIZES: OS
  • PACKED: 72 Pair/Case
Safety Glasses

Sunburst™

Full Frame Safety Glasses with Black Frame, Gray Lens and Anti-Scratch / Anti-Fog Coating

250-47-0021

  • Gray Lens
  • AS/AF
  • Black Frame
  • Rubber Nose Pads and Temple Tips
  • 8 Base Curve Lens
  • SIZES: OS
  • PACKED: 72 Pair/Case
Safety Glasses

Zenon™

Rimless Safety Glasses with Navy Blue Temple, Amber Lens and Anti-Scratch Coating

250-02-5529-EN

  • Rimless Safety Glasses
  • Yellow AS/AF Lenses Polycarbonate Lenses
  • Low Pressure Temples
  • Molded Nose Bridge
  • SIZES: OS
  • PACKED: 144 Pair/Case
Cut Resistant Gloves BEST SELLER

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - 21 Gauge - Touchscreen Compatible

16-541

  • PolyKor Blend Seamless Knit
  • 21 Gauge
  • Black
  • Black Polyurethane Coated Flat Grip
  • Palm & Fingertips
  • Reinforced Thumb Crotch
  • Touchscreen
  • SIZES: 6-11
  • PACKED: 12 Dozen/Case

3X31D

EN 388 2016 Results: 3X31DX

Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves NEW

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with D3O® Impact Protection and Nitrile MicroSurface Coated Palm & Fingers

16-MPT630

  • Seamless Knit
  • 13G Black
  • Black Nitrile Microsurface Grip
  • Palm & Fingers
  • ANSI Level 3 Hi-Vis Impact Protection
  • Touchscreen
  • Knit Wrist
  • SIZES: 7-11
  • PACKED: 36 Pair/Case

4X42F

EN 388 2016 Results: 4X42FP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers - Touchscreen Compatible

16-378

  • PolyKor Blend
  • 18 Gauge
  • Black
  • Black Foam Nitrile Coated Silicone Free
  • Touchscreen
  • Reinforced Thumb
  • SIZES: 6-11
  • PACKED: 6 Dozen/Case

4X42F

EN 388 2016 Results: 4X42FX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves NEW

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers - 21 Gauge - Touchscreen Compatible

16-351

  • PolyKor Blend Seamless Knit
  • 21 Gauge
  • Black Nitrile Coated Foam Grip Palm
  • Latex Free
  • Reinforced Thumb Crotch
  • Touchscreen
  • SIZES: 6-11
  • PACKED: 12 Dozen/Case

3X42E

EN 388 2016 Results: 3X42E

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves

G-Tek® Suprene™

Seamless Knit Suprene™ Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

15-440

  • Nanotech Fiber Blended Glove
  • Economical
  • Tan 13 Gauge Shell
  • Black NeoFoam Coated
  • Touchscreen Compatible
  • Silicone Free
  • SIZES: 6-11
  • PACKED: 6 Dozen/Case

4542D

EN 388 2016 Results: 4542DX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves BEST SELLER

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-377

  • PolyKor Blend w/ X7 Technology
  • 18 Gauge
  • Black
  • Black NeoFoam Coated Grip
  • Touchscreen Compatible
  • FDA 21 CFR Compliance
  • Silicone Free
  • SIZES: 7-11
  • PACKED: 6 Dozen/Case

4X42F

EN 388 2016 Results: 4X42FX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-368

  • PolyKor X7 Blend Seamless Knit Shell
  • 18 Gauge
  • Burgundy
  • Black NeoFoam Coated Grip
  • Touchscreen Compatible
  • Silicone Free
  • SIZES: 7-11
  • PACKED: 6 Dozen/Case

4X31C

EN 388 2016 Results: 4X31CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

16-319

  • PolyKor Seamless Knit Shell
  • 18 Gauge
  • Light Blue
  • Blue Polyurethane Grip
  • Palm & Fingertips
  • Touchscreen Compatible
  • Knit Wrist
  • Lightweight
  • SIZES: 6-11
  • PACKED: 6 Dozen/Case

3X41B

EN 388 2016 Results: 3X41BX

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Cut Resistant Gloves

G-Tek® PolyKor® X7™

Seamless Knit PolyKor™ X7™ Blended Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Full Hand - Touchscreen Compatible

16-939

  • PolyKor X7 Blend Seamless Knit
  • 18 Gauge
  • Double Dip
  • Full Blue Nitrile Black Nitrile Microsurface Grip
  • Touchscreen Compatible
  • Silicone Free
  • SIZES: 6-11
  • PACKED: 6 Dozen/Case

4X42D

EN 388 2016 Results: 4X42DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves BEST SELLER

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Impact Protection and NeoFoam® Coated Palm & Fingers

16-MP585

  • Seamless Knit
  • 18 Gauge Blue
  • Black NeoFoam Grip
  • Palm & Fingertips
  • L1 TPR Impact Protection
  • Reinforced Thumb Crotch
  • Touchscreen Compatible
  • SIZES: 8-11
  • PACKED: 36 Pair/Case

4X42E

EN 388 2016 Results: 4X42EP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves BEST SELLER

G-Tek® VR-X™

Seamless Knit PolyKor® Blended Glove with Polyurethane Advanced Barrier Coating Protection – Touchscreen Compatible

16-VRX380

  • G-Tek VRX 18G Gray HPPE
  • PU Fully Coated
  • ESD
  • Antibacterial & Antiviral
  • Touchscreen Compatible
  • Silicone Free
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case

4X32C

EN 388 2016 Results: 4X32CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves

G-Tek® 3RX™

G-TEK 3RX 13G BLACK RECYCLED YARN/ELASTANE BLENDED SEAMLESS CUT RESISTANT KNIT GLOVES WITH GRAY POLYURETHANE GRIP

16-133R

  • G-Tek® 3RX™ black recycled yarn
  • Gray PU coating
  • Resistant to contact heat at 100°C
  • Touchscreen compatible
  • Oeko Tex and Global Recycled Standard (GRS)
  • 40,83g reduction in CO2 emissions per pair
  • SIZES: 6-11
  • PACKED: 72 pairs/case
  • SIZES: 6-11
  • PACKED: 72 Pair/Case

4X31C

EN 388 2016 Results: 4X31C

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X1XXXX

Protective Gloves Against Thermal Hazards: X1XXXX

Resistance to Flammability - X
Contact Heat Resistance - 1
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Cut Resistant Gloves

G-Tek® PolyKor® X7™

G-TEK® POLYKOR® X7™ SEAMLESS KNIT POLYKOR® X7™ BLENDED GLOVE WITH NEOFOAM® MICRO-SURFACE COATED PALM & FINGERS TOUCHSCREEN COMPATIBLE - 18 GAUGE

16-315

  • G-Tek® PolyKor® X7™ engineered yarn
  • Gray Shell
  • 18 gauge high dexterity
  • Gray Neofoam® Micro-Surface grip
  • Touchscreen compatible
  • Reinforced thumb crotch
  • SIZES: 6-11
  • PACKED: 72 pairs per case
  • SIZES: 6-11
  • PACKED: 72 Pair/Case

4X41D

EN 388 2016 Results: 4X41D

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 1
Cut (TDM-100 Test): D
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Cut Resistant Gloves

G-Tek® PolyKor® X7™

G-TEK® POLYKOR® SEAMLESS KNIT NEOFOAM® COATED PALM & FINGERS - TOUCHSCREEN COMPATIBLE - 18 GAUGE

16-326

  • G-Tek® PolyKor® X7™ Engineered Yarn
  • Beige Shell
  • 18 gauge high dexterity
  • Black Neofoam® coating
  • Food contact
  • Touchscreen compatible
  • SIZES: 6-11
  • PACKED: 72 pairs per case
  • SIZES: 6-11
  • PACKED: 72 Pair/Case

4X41B

EN 388 2016 Results: 4X41B

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Cut Resistant Gloves

G-Tek® PolyKor® X7™

G-TEK® POLYKOR® X7™ SEAMLESS KNIT POLYKOR® X7™ BLENDED GLOVE WITH NEOFOAM® COATED PALM & FINGERS TOUCHSCREEN COMPATIBLE - 18 GAUGE

16-365

  • PolyKor® X7™ Blend Seamless Knit Shell
  • 18 Gauge
  • Burgundy
  • Black NeoFoam Coated Grip
  • Food contact
  • Touchscreen Compatible
  • Silicone Free
  • SIZES: 7-11
  • PACKED: 72 Pair/Case

4X31C

EN 388 2016 Results: 4X31C

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Cut Resistant Gloves

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

09-K1218

  • Engineered Kevlar Yarn
  • Gray Shell
  • 18 Gauge High Dexterity
  • NeoFoam Coated Grip
  • Touchscreen Compatible
  • Silicone Free
  • SIZES: 7-11
  • PACKED: 6 Dozen/Case

4X31C

EN 388 2016 Results: 4X31CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X1XXXX

Protective Gloves Against Thermal Hazards: X1XXXX

Resistance to Flammability - X
Contact Heat Resistance - 1
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves

G-Tek® PolyKor® Xrystal®

Seamless Knit PolyKor® Xrystal® Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-X585

  • Black PolyKor Blended Shell
  • 13 Gauge
  • Black NeoFoam Coated Grip
  • Touchscreen Compatible
  • Reinforced Thumb Crotch
  • Silicone Free
  • SIZES: 7-11
  • PACKED: 6 Dozen/Case

4X42E

EN 388 2016 Results: 4X42EX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Safety Glasses

Zenon™

Rimless Safety Glasses with Navy Blue Temple, Clear Lens and Anti-Scratch / Anti-Fog Coating

250-02-0020-EN

  • Rimless Safety Glasses
  • Clear AS/AF Lenses Polycarbonate Lenses
  • Low Pressure Temples
  • Molded Nose Bridge
  • SIZES: OS
  • PACKED: 144 Pair/Case
Safety Glasses

Zenon™

Rimless Safety Glasses with Navy Blue Temple, Gray Lens and Anti-Scratch / Anti-Fog Coating

250-02-0021-EN

  • Rimless Safety Glasses
  • Gray AS/AF Lenses Polycarbonate Lenses
  • Low Pressure Temples
  • Molded Nose Bridge
  • SIZES: OS
  • PACKED: 144 Pair/Case
Cut Resistant Gloves

G-Tek® PolyKor®

Hi-Vis Seamless Knit PolyKor® Blended Glove with Nitrile Coated Foam Grip on Palm, Fingers & Knuckles

16-327-EN

  • PolyKor Blend Seamless Knit Shell
  • HV yellow 15G PolykorShell
  • Nitrile Grip
  • 3/4 Dip
  • Heat Resistant
  • Complies w/ FDA 21 CFR
  • Foam Nitrile
  • SIZES: 7-11
  • PACKED: 6 Dozen/Case

4X31B

EN 388 2016 Results: 4X31BX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X1XXXX

Protective Gloves Against Thermal Hazards: X1XXXX

Resistance to Flammability - X
Contact Heat Resistance - 1
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Safety Glasses

Bond™

Full Frame Safety Glasses with Translucent Charcoal Frame, Red Mirror Plus Lens and Anti-Scratch / Anti-Reflective Coating

250-89-0004-EN

  • Full Nylon Frame Safewty Glasses
  • Red Mirror Plus AS Lenses Classic Keyhole Bridge
  • Translucent Charcoal Frame
  • No Metal Parts
  • SIZES: OS
  • PACKED: 72 Pair/Case
Safety Glasses

Bond™

Full Frame Safety Glasses with Translucent Charcoal Frame, Green Mirror Plus Lens and Anti-Scratch / Anti-Reflective Coating

250-89-0008-EN

  • Full Nylon Frame Safewty Glasses
  • Green Mirror Plus AS Lenses Classic Keyhole Bridge
  • Translucent Charcoal Frame
  • No Metal Parts
  • SIZES: OS
  • PACKED: 72 Pair/Case
Safety Glasses

Bond™

Full Frame Safety Glasses with Translucent Charcoal Frame, Gray Lens and Anti-Scratch / Anti-Fog Coating

250-89-0021-EN

  • Full Nylon Frame Safewty Glasses
  • Grat Plus AS/AF Lenses Classic Keyhole Bridge
  • Translucent Charcoal Frame
  • No Metal Parts
  • SIZES: OS
  • PACKED: 72 Pair/Case
Heated Apparel BEST SELLER

Boss®

Therm™ Heated Vest

300-HV100

  • Heated Vest
  • Light
  • Active Fit Versatile Design
  • 3 Level Heating
  • Layer Under Outerwear
  • Remote Control
  • Battery
  • One Size
  • Patented
  • SIZES: OS
  • PACKED: 12/Case
Warming

Boss®

HEATED VEST BATTERY, 5V, WEIGHT 140G, 11.9*9.2*7CM

399-HVBAT

  • Heated Vest 5V Battery
  • PACKED: 60/Case
Warming

Boss®

Heated Vest Remote Control Box

399-HVRE

  • Remote Controller for Heated Vest
  • SIZES: OS
  • PACKED: 60/Case
Ext-Use Disposables

Grippaz™ Skins

Extended Use Ambidextrous Nitrile Glove with Textured Fish Scale Grip - 6 Mil

246BK

  • Food contact
  • Touch Scren feature
  • Reistant to virus
  • Patented fishscale pattern
  • 100% nitrile
  • Resistant to chemicals
  • SIZES: S-XL
  • PACKED: 50 Boxes/Case
Protective Gloves Against Micro-organisms

The EN ISO 374-5 VIRUS standard measures the ability of gloves to protect users against bacteria, fungi and viruses. Gloves with this marking must pass EN374-2 for leak testing.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Ext-Use Disposables

Grippaz™ Skins

Extended Use Ambidextrous Nitrile Glove with Textured Fish Scale Grip - 6 Mil

246OR

  • Food contact
  • Touch Scren feature
  • Reistant to virus
  • Patented fishscale pattern
  • 100% nitrile
  • Resistant to chemicals
  • SIZES: S-XL
  • PACKED: 50 Boxes/Case
Protective Gloves Against Micro-organisms

The EN ISO 374-5 VIRUS standard measures the ability of gloves to protect users against bacteria, fungi and viruses. Gloves with this marking must pass EN374-2 for leak testing.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves

G-Tek® PolyKor®

Hi-Vis Seamless Knit PolyKor® Blended Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers

16-340OR

  • PolyKor Blend Seamless Knit
  • 13 Gauge
  • Hi-Vis Orange
  • Double Dipped
  • Black Nitrile MicroSurface Grip Over Flat Nitrile
  • Knit Wrist
  • SIZES: 7-11
  • PACKED: 6 Dozen/Case

4X44C

EN 388 2016 Results: 4X44CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 4
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Cut Resistant Gloves

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers

16-350

  • PolyKor Blend Seamless Knit
  • 13 Gauge
  • Salt & Pepper
  • Black Nitrile Microsurface Coated Grip
  • Palm & Fingertips
  • Knit Wrist
  • SIZES: 7-11
  • PACKED: 6 Dozen/Case

4X43D

EN 388 2016 Results: 4X43DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

SHOWING 1-36 OF 98 ITEMS
1 of 3
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL